Finishing up the doors

posted Sep 7, 2012, 5:55 AM by Bill Thomasson   [ updated Sep 7, 2012, 6:26 AM ]
7/17/12 - Cut out high spots on window flange and re-fierglassed the covering insert.  Added holes for automotive christmas tree pop snaps.  and trimmed to door.
Sanded door insert, and sanded door edges that will get paint.  Applied micro.
Started door lock. 
Found I needed to dissassemble the racks to finishe everythingk.
Finished door lock
Applied headliner to fiberglass insert.
Applied smooth prime to door.
Epoxied in magnets for sensores and test fit sensors.
Doors are done and put away except for the windows and exterior finishing.