Firewall Forward‎ > ‎


posted Jun 6, 2013, 9:05 AM by Bill Thomasson
Deburred, match drilled and assembled baffling, and riveted.
Primed, and then coated with spraycan high temp paint.
About 20 hrs of work.
After engine was installed I assembled them on the engine.
I was thinking that I could use them to help balance the cowl on them for fitting the cowl.
This won't work as they are too tall and interfere before they are trimmed.  So the baffeling had
to come off to fit the cowl. 
So don't bother with the baffling until the cowl is fitted.