Firewall Forward‎ > ‎

Exhaust System

posted Mar 24, 2014, 8:31 AM by Bill Thomasson
I received 2 different sets of exhaust bolts.  One with the engine, one with the exhaust.  I decided to put the ones that came with the engine on, as they were all metal lock nuts, vs nuts with metal lock washers.
When I had my DAR inspection he stated I should use the nuts with lock washers instead, that the all metal ones will freeze up and be very difficult if not impossible to remove after time.

This is the INCORRECT Nut.

Other than that, the exhaust goes together straight forward except maybe the hangers that go out of the firewall.


Comments