Firewall Forward‎ > ‎

Starter / Alternator Wiring / Baffle wires

posted Feb 5, 2014, 8:39 AM by Bill Thomasson

Shows the Starter/Alternator wire and up top the bent wire that pulls the baffling tight.
I added a 2" section of 1/8" aluminum to spread the load of the wire as there are many reports of the washer wearing through the baffeling.
Other End bend.
Baffle wire is still touching the oil tubes.  Ended up doing additional bends.  
Will try to take some more pictures.


Comments