Countersink and more triming

posted May 14, 2012, 8:10 AM by Bill Thomasson
Countersunk all screw holes around doors and match drilled holes for screws in bottom of door.
 
Match drilled rivet backing strips and countersunk all holes for skin dimple.
 
Marked Door and window openings and sanded to 3/4 in. (fine tuneing).
Bottom of door is 7/8", sides of doors 3/4", and top of door is 1"+
 
Will start building up door edges and laying some more fiberglass to compensate for the gutter removal tonight.
 
8 hr spend on these tasks.
 
Comments