Areosport interior complete

posted Jun 14, 2012, 6:20 AM by Bill Thomasson
Well not complete, but as much as can be done until doors are complete.
 
First I cut sound insulation to go under the panels. The forward most insulation is cut about 2" from the firewall so as to not be a fire hazard as it is not firewall rated.
 
Cut front panels to fit under dash. I cut them with tin shears.
Attached cup holder and map pocket to side panels
Back side of panel.
 
Drilled screw holes in all the panels, and then installed nutplates in the structure.
Tip: Don't install baggage compartment closeout panel until you have added the nutplate for the aerosport panel.
 
Aerosport interior complete!
Comments