Overhead finalize

posted Jun 25, 2012, 7:37 AM by Bill Thomasson
Final assmebled all the lights and vents on the overhead console.  Added the cabin lights, and a switch.  Used a little RTV under the flanges of the lights and vents to make sure there is no air leakage around them.
 
As soon as I get my wiring kit, I will be able to wire the console and then glue it in place on the cabin top.
 
Also cut and test assembled the air vents tubes into the rear bulkhead.
Pilot hole cut
Holes finished and scat tube attached.  Right tube still needs cut to length in this picture.
Comments