Home‎ > ‎Panel / Wiring‎ > ‎

Pannel / Rudder Trim

posted Sep 7, 2012, 6:19 AM by Bill Thomasson   [ updated Sep 7, 2012, 6:21 AM ]
Laid out panel and switches.  At Oschkosh decided to go with the G3X as the avionics.  I am still hoping that they will come out with a 10" screen before I have to purchase the screen, but I am moving forward with the G3X either way.
 
 
Started figuring out where to put the rudder time.  It needs to be mounted on the left side to avoid interferance with the break lines.  I ended up resessing it a little more then I would want to to avoid the air vents.  Easy to use if you know where it is, but not very visible.
 
The trim knob shown connects to the rudder pedals with a wire and springs causing tention on the cable one way or the other.  Simple and hopefully effective.
 
Comments